Schreiben Sie uns!
Rufen Sie uns an!
The scheme shows an Aquinity P10 Analytical.
To save valuable benchtop space the system can be ordered as BI configuration. The system will be installed underneath the work bench and only the display and dispenser are mounted on the wall.
To save valuable benchtop space the system can be ordered as wall mounted configuration. the whole system can be mounted on the wall with inclined display.
Validation documents for water purification systems.
The TOC monitoring during production and intermittent measurements during non-use periods allows to check the organic content in water continuously. The TOC value is measured between 1 and 999 ppb and can be shown in the display to monitor organic impurities.
Our dispenser allows the volumetric controlled dispensing of water with an increment of 0.1 L and a tap volume from 0.1 to 99 L. The system prevents overflow of containers and allows to dispense water without supervising.
To be integrated into an ultra pure water system with a max, flow rate of 2 L/min. Point of use dispense arm with integrated control unit. Two joint to move it horizontally and vertically allowing to fill containers up to 55 cm height. Volumetric dosing of ultra pure water allows filling of containers without the attention of user, dosing eange 0.1 – 99 L, variable input and storage of values, after volume has been dispensed system goes back to standby.
| Technical Specifications | |
|---|---|
| ultrapure water quality | 0.055 µS/cm; Type I |
| resistivity | 18.2 MegaOhm/cm |
| total organic carbon (TOC) | < 10 ppb reagent, < 3 ppb Analytical |
| dispensing flow rate | 1.5 L/min |
| production rate | 8 L/h* |
| bacteria | < 1 cfu/mL |
| particulate | > 0.2 µm less than 1 particulate/mL |
| RNAse | < 1 pg/mL** |
| DNAse | < 5 pg/mL** |
| dimensions, weight, power | 504 x 340 x 535 mm, 16-20 kg, 110 - 230 V |
| *not possible to tap pure water **with microbiological final filter |
| Feed Water Requirements | |
|---|---|
| type of feed water | tap water |
| feed water conductivity | < 1400 µS/cm |
| inlet pressure | 1.5 to 6 bar |
| free chlorine | < 0.1 mg/L |
| Silt Density Inded (SDI) | < 3 |
| pH | 3 to 9 |
| temperature | 5 to 25 °C |
The "Aquinity² P10" is a laboratory water system that provides its user with ultrapure water for a wide variety of analytical and laboratory applications.
The Aquinity²P10 produces ultrapure water from drinking water for laboratory applications that require water of the highest quality.
With its compact design, the Aquinity² takes up little valuable laboratory space and its simple and intuitive operation makes it easy to integrate into everyday laboratory work.
Customers have the option of selecting a system with or without UV lamp, depending on the area of application. If work is carried out in the life science sector, a biological final filter can be connected downstream.
Due to the simple and clear design of the software, the user can quickly operate the device through intuitive handling. The software informs the user when limit values have been exceeded or when consumables such as cartridges or UV lamps need to be replaced. A wizard guides the user through the individual steps.
In addition to the hoses for inlet and outlet, the scope of delivery also includes an adapter that makes it easy for them to connect the system to a drinking water connection.
The system has an integrated 10 liter tank, which provides the RO water produced for further purification.
The installation location can be designed very flexibly. Depending on the available work surface, the system can be integrated directly on the equipment, on the wall or under the lab bench. The display, which can be installed flexibly, also ensures convenient operation.
membraPure endeavours as far as reasonably possible to provide correct and complete information on this website. However, membraPure does not guarantee that the information provided is up-to-date, correct and complete. The same applies to the content of external websites that this site refers to directly or indirectly via hyperlinks, programmes, files, contents or hyperlinks to other websites are provided without any expressed or implied warranty.
membraPure GmbH, Wolfgang-Kuentscher Str. 14, 16761 Hennigsdorf