The series of AquaRO², AquaRO²DI and EDI² are based on a reverse osmosis (RO) unit to produce deionised water. The EDI² series further processes the osmosis water by using an EDI cell to get Type II water. All sytems provide you with reliable and compact systems at low operating costs. The advantages of both series is the flexibility in terms of configuration. A production rate of 8 to 40 L/h in three different degrees of pure water (10 µS/cm to 0.2 µS/cm) is available. Optionally the systems can be equipped with a dispenser. The customer can select a 35 L ,70 L or individual tank size.

Technical Specifications of produced water:

  • Resistivity/Conductivity:

          > 0.1 MOhm x cm to > 5 MOhm x cm

          < 10 µS/cm to < 0.2 µS/cm

  • production rate:

          8 L/h to 40 l/h

  • Total Organic Carbon (TOC):

          < 20 ppb to 50 ppb

For further and detailed informations regarding specifications and flowchart for each systems, please check out our brochure.

Advantages of the new systems

• Compact housing
• Big touchscreen
• Remote service module
• Menus and wizards easy to use and mistake avoiding
• New fixed and flexible dispenser
• Easy access for cartridge exchange

Advantages of the new systems

• Compact housing
• Big touchscreen
• Remote service module
• New fixed and flexible dispenser
• Easy access for cartridge exchange
• Menus and wizards easy to use and mistake avoiding

Options

Bench integrated configuration (BI version)

To save valuable benchtop space the system can be ordered as BI configuration. The system will be installed underneath the work bench and only the display and dispenser are mounted on the wall.

Wall mounted configuration

To save valuable benchtop space the system can be ordered as wall mounted configuration. the whole system can be mounted on the wall with inclined display.

upgrade with dispenser

Upgrade of system with fixed and flexible dispenser for the series of AquaRO² 10 + 20 and EDI² 10 + 20.

volumetric dispensing

Our dispenser for the series of AquaRO² 10 + 20 and EDI² 10 + 20 allows the volumetric controlled dispensing of water with an increment of 0.1 L and a tap volume from 0.1 to 99 L. The system prevents overflow of containers and allows to dispense water without supervising.

additional tank

The series of AquaRO² and EDI² can be equipped with a tank of 35 L or 70 L or individual size and if requested also with an integrated UV lamp. An exception is the AquaoRO² 8 P10 with an integrated tank of 10 liters.

Softener Unit

Compact system in cabinet including control box for the pretreatment.

Click here for more technical information.

 
Technical Specifications    
ModelAquaRO²AquaRO²DIAquaRO² 8 P10 | P10 DIEDI²
pure water quality< 10 µS/cm< 2 µS/cm; Type II< 10 µS/cm | < 2 µS/cm< 0.2 µS/cm; Type II
resistivity> 0.1 MegaOhm/cm> 0.5 MegaOhm/cm> 0.1 MegaOhm/cm | > 0.5 Megaohm/cm> 5 MegaOhm/cm
total organic carbon (TOC)< 50 ppb< 40 ppb< 40 ppb< 20 ppb
production rate8 L/h to 40 L/h8 L/h to 20 L/h8 L/h10 L/h to 40 L/h
bacteria< 50 cfu/mL< 50 cfu/mL< 50 cfu/mL< 10 cfu/mL
DNAse< 5 pg/mL*
dimensions, weight, power (except AquaRO² 40 and EDI²40)
AquaRO²: 504 x 340 x 535 mm, 16 to 20 kg, 110 V - 230 V
EDI²: 504 x 340 x 535 mm, >40 kg, 110 V - 230 V
Feed Water Requirements  
ModelAquaRO²EDI²
type of feed waterpotable water / tap waterpotable water / tap water
feed water conductivity< 1400 µS/cm< 1400 µS/cm
inlet pressure1.5 to 6 bar< 5 bar
free chlorine< 0.1 mg/L< 0.02 mg/L
Silt Density Index (SDI)< 3< 3
pH3 to 93 to 9
temperature5 to 25 °C5 to 25 °C
iron / manganesen. a. / n. a.< 0.01 mg/L / < 0.01 mg/L
sulfaten. a.< 2 mg/mL

 

 

For further informations please check the brochure or CONTACT US!